Product Manual

Page of 7

IMPORTANT SAFETY CONSIDERATIONS

CARGO CARRIER

USE AND CARE

 Do not modify the cargo carrier in any way. Unauthorized modification may impair the

function and/or safety and could affect the life of the equipment. There are specific

applications for which the cargo carrier was designed.

 Always check of damaged or worn out parts before using the cargo carrier. Broken

parts will affect the cargo carrier operation. Replace or repair damaged or worn parts

immediately.

 Store idle cargo carrier. When the cargo carrier is not in use, store it in a secure place out

of the reach of children. Inspect it for good working condition prior to storage and before

re-use.

 Do not exceed the limit weight of 500 lbs. (227kg)

Tools Needed for Assembly

Open Wrench (1 pc.) Open Wrench (1 pc.) Open Wrench (2 pc.) Hex Key (1 pc.) Hex Key(1 pc.)

Size=16mm Size=13mm Size=7mm Size=6mm Size=5mm

ASSEMBLY

Step 1

Lay the base (2) flat, install the front (6), back (3), side (1) frames on via M4 hex bolt (5) and

M4 locknut (4).

P.S: All support plates on frames should be put inside rails of the base, then

align all the holes, tighten with bolt and nuts.

See FIG. 1

FIG. 1

Support plate assembled on the rail of base

Base rail

Support plate