7In., 2-Channel Backup Camera Owner’s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury.
Thank you very much for choosing an Ultra-Tow™ product! For future reference, please complete the owner’s record below: Serial Number/Lot Date Code: ________________________________ Purchase Date: ____________________________________________ Save the receipt, warranty, and this manual. It is important that you read the entire manual to become familiar with this product before you begin using it. This camera is designed for certain applications only.
Table of Contents Intended Use .......................................................................................................................................... 4 Packaging Contents .............................................................................................................................. 4 Technical Specifications ...................................................................................................................... 4 Important Safety Information .................
Intended Use The Ultra-Tow 7In., 2-Channel Backup Camera includes a crystal-clear 7'' LCD monitor. It’s the perfect addition for any driver who needs assistance backing up. It’s also an LCD monitor which is very light, as well as thin. It has two video inputs allowing for an additional camera to the system (additional camera not included). The truck rear view camera has a 120° viewable angle, is water-resistant, and has auto-night vision.
intended to do. There are certain applications for which this equipment was designed. DO NOT use this equipment for a purpose for which it was not intended. Industrial or commercial applications must follow OSHA requirements. ⚠WARNING WORK AREA SAFETY Inspect the work area before each use. Keep work area clean, dry, free of clutter, and well-lit. Cluttered, wet, or dark work areas can result in injury.
Check for damaged parts before each use. Carefully check that the product will operate properly and perform its intended function. Replace damaged or worn parts immediately. Never operate the product with a damaged part. Do not use a product with a malfunctioning switch. Any power tool that cannot be controlled with the power switch is dangerous and must be repaired by an authorized service representative before using.
Assembly Instructions ⚠WARNING The monitor contains high voltage. It should only be opened by a qualified technician. 1. Connect the monitor wires: a. Connect the wire with the yellow connector to the 20m 4P cable, which will connect to the camera. If you use 2 cameras, the white wire connector will be used to connect the cable to the second camera. b. Connect the black wire for grounding. c. Connect the red wire to the car key power. d.
Operating Instructions ⚠WARNING Do not rely solely on the camera for obstructions while in reverse. Check your surroundings for safety before driving in reverse. The device may be powered by a 12 ~ 24 volt automotive battery or a vehicle electrical system. Make sure all cables are connected properly to observe polarity. Improper cable connections may damage the monitor. Remove the power cable connections when you do not intend to use the camera.
Pull out Push (1) Video select (2) Decrease button (3) Mode select (4) Power ON/OFF (5) Increase button (6) Menu Page 9 of 12
After Each Use ⚠WARNING To avoid property damage, do not expose the monitor to excessive heat or cold. The storage temperature of the camera is -30 to +70°C and the operating temperature is -20 to +50°C. The humidity is Rh90%. Maintenance ⚠WARNING Remove all the cable connections from the monitor before cleaning the unit. Use a mild household detergent and clean the unit with a slightly damp, soft cloth.
Limited Warranty Northern Tool and Equipment Company, Inc. ("We'' or "Us'') warrants to the original purchaser only ("You'' or "Your") that the Ultra-Tow product purchased will be free from material defects in both materials and workmanship, normal wear and tear excepted, for a period of three years from date of purchase. The foregoing warranty is valid only if the installation and use of the product is strictly in accordance with product instructions.
Distributed by: Northern Tool & Equipment Company, Inc. Burnsville, Minnesota 55306 www.northerntool.