Product Manual

Page 7 of 14
 When using the solid caster, make certain the supplied pin is fully inserted through both sides of
the inner tube and the drop tube before using the jack.
 Never attempt to adjust the solid caster when there is any load on the jack.
Main Parts of Trailer Jack
Reference Subassembly
1 Hand Crank Handle
2 Light Switch
3 Extend / Retract Motor Switch
4 Connector Storage Bracket
5 Bracket
6 M10 Lock Washers
7 Flat Washer
8 M10 x 100 Hex bolts
9 Plastic Wheel
10 Footpad (not included, can replace the wheel)
11 7-way Connector