Product Manual

Page 4 of 14
Intended Use
The Ultra-Tow Electric Trailer Jack attaches to the trailer tongue of a boat, power sport, or equipment
trailer. The swivel trailer jack allows the user to move, level, and hitch the trailer with ease. It swivels
to a horizontal position during transportation.
The 7-way connector plugs into your vehicle connector to let you lift or lower the jack with the push of
a button, no hard wiring required. The plastic connector storage bracket holds your 7-way connector
firmly in place to protect from weather, dirt, and damage.Improved LEDs illuminate the work area for
superior nighttime visibility.
Tools and Components Required
Technical Specifications
Property Specification
Type 12V DC
Lift Capacity (lb.) 1,500
Support Capacity (lb.) 2,250
Clearance: Bracket to Jack Top (in.) 18
Length of Travel (in.) 10
Length Retracted (in.) 15(Measured from ground to center of mounting point)
Length Extended (in.) 26 (Measured from ground to center of mounting point)
Jack Tube Size (in.) 2
Crank Type Includes manual crank handle
Ground Support Plastic wheel
Mount Type Swivel mounting plate
Construction Steel
Mount Type Fits 2in. mounting holes
Mount Height (in.) 15
Important Safety Information
⚠WARNING
 Read and understand all instructions. Failure to follow all instructions may result in serious injury
or property damage.
 The warnings, cautions, and instructions in this manual cannot cover all possible conditions or
situations that could occur. Exercise common sense and caution when using this tool. Always be
 Four Brackets
 Four M10 Lock Washers
 Four Flat Washers
 Four M10 x 100 Hex Bolts
 9/16 inch Wrench (owner supplied, not included)
 Torque Wrench (owner supplied, not included)
 Wire Cutters (owner supplied, not included)
 Wire Strippers (owner supplied, not included)
 Crimpers or Soldering Iron (owner supplied, not included)