Product Manual

Page 4 of 15
Intended Use
The Ultra-Tow 5000-Lb. Capacity Electric Trailer Jack has a ball and screw design. The brake motor
increases the lift efficiency and reduces friction. The motor works less, draws less amperage, creates
less heat, and produces less noise. This greatly increases the motor and jack life. The brake motor
ensures free stops at any time, preventing damage caused by hard stops and excessive pressure.
The 7-way connector plugs into your vehicle allowing you to lift or lower the jack with the push of a
button (no hard wiring). The jack has a one-piece, water-proof, industrial design cover. Improved
LEDs illuminate the area in front of the jack for superior nighttime visibility. The plastic connector
storage bracket holds your 7-way connector firmly in place to protect from weather, dirt, and damage.
Packaging Contents
Technical Specifications
Property
Type
Lift Capacity (lb.)
Support Capacity (lb.)
Clearance: Bracket to Jack Top (in.)
Length of Travel (in.)
Length Retracted (in.)
Length Extended (in.)
Drop Leg Travel (in.)
Jack Tube Size (in.)
Crank Type
Ground Support
Mount Type
Construction
Mount Type
Mount Height (in.)
Important Safety Information
WARNING
Read and understand all instructions. Failure to follow all instructions may result in serious injury
or property damage.
Tools and Components Required
A-Frame Coupler with Lower Support Plate (owner supplied, not included)
Three Grade 5, 1in. Long, 3/8in.-16 UNC Bolts
Three 3/8in. Flat Washers
Three Lock Washers
9/16in. Wrench (owner supplied, not included)
Torque Wrench (owner supplied, not included)
Wire Cutters (owner supplied, not included)
Wire Strippers (owner supplied, not included)
Crimpers or Soldering Iron (owner supplied, not included)