Product Manual

Page 4 of 12
Intended Use
This Ultra-Tow XTP Series Locking Lunette Ring features a single-piece, cast ductile iron with a steel
hitch bracket and lock assembly that is designed for an off-the-shelf padlock. No adapter is needed.
The hitch can be used with a pintle hook or a pintle combo.
Technical Specifications
Property
Specification
Max. Gross Trailer Weight
20 ton (40,000 lbs.)
Max. Vertical Load
4 ton (8,000 lbs.)
Product Weight
26 lbs.
Total Length
11.75 in.
Material
Austempered Ductile Iron
Hole Mount Spacing
5/8'' Diameter - 2'' Apart
Eyelet Diameter
2
7/8
'' ID x 6” OD
Important Safety Information
⚠WARNING
 Read and understand all instructions. Failure to follow all instructions may result in serious injury
or property damage.
 The warnings, cautions, and instructions in this manual cannot cover all possible conditions or
situations that could occur. Exercise common sense and caution when using this lunette ring.
Always be aware of the environment and ensure that the lunette ring is used in a safe and
responsible manner.
 Do not allow persons to operate or assemble the h lunette ring itch until they have read this
manual and have developed a thorough understanding of how it works.
 Do not modify this lunette ring in any way. Unauthorized modification may impair the function
and/or safety and could affect the life of the product. There are specific applications for which the
product was designed.
 Use the right tool for the job. DO NOT attempt to force small equipment to do the work of larger
industrial equipment. There are certain applications for which this lunette ring was designed. It
will be a safer experience and do the job better at the capacity for which it was intended. DO
NOT use this equipment for a purpose for which it was not intended.
 Industrial or commercial applications must follow OSHA requirements.
⚠WARNING
This product may contain chemicals known to the State of California to cause cancer, birth defects, or
other reproductive harm.