Locking Lunette Ring 20-Ton Capacity Owner’s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury.
® Thank you very much for choosing an Ultra-Tow XTP Series product! For future reference, please complete the owner’s record below: Serial Number/Lot Date Code: ________________________________ Purchase Date: ____________________________________________ Save the receipt, warranty, and this manual. It is important that you read the entire manual to become familiar with this product before you begin using it. This lunette ring is designed for certain applications only.
Table of Contents Intended Use .......................................................................................................................................... 4 Technical Specifications ...................................................................................................................... 4 Important Safety Information ............................................................................................................... 4 Specific Operation Warnings .......................
Intended Use This Ultra-Tow XTP Series Locking Lunette Ring features a single-piece, cast ductile iron with a steel hitch bracket and lock assembly that is designed for an off-the-shelf padlock. No adapter is needed. The hitch can be used with a pintle hook or a pintle combo. Technical Specifications Property Max. Gross Trailer Weight Max. Vertical Load Product Weight Total Length Material Hole Mount Spacing Eyelet Diameter Specification 20 ton (40,000 lbs.) 4 ton (8,000 lbs.) 26 lbs. 11.75 in.
⚠WARNING WORK AREA SAFETY Inspect the work area before each use. Keep work area clean, dry, free of clutter, and well-lit. Cluttered, wet, or dark work areas can result in injury. Using the lunette ring in confined work areas may put you dangerously close to cutting tools and rotating parts. Keep children and bystanders away from the work area while operating the lunette ring. Do not allow children to handle the product.
Maintain an adequate vertical down (tongue) load to maintain control of the trailer (generally 10%) without exceeding the specified rated capacities. Other steps and inspections are also required. Consult OSHA, D.O.T. regulations, and the American Trucking Association for complete coupling and uncoupling procedures. Towing ⚠WARNING Trailers and equipment designed for on-road towing within the stated capacities.
Lock Assembly Function Assembly in Locked Position The illustration shown above is in the locked position. Install the padlock in the locking pole (padlock not shown). Insure the lock assembly is in the unlocked position (illustrated below) before hooking it up. Assembly in Unlocked Position The illustration to the left is in the unlocked position. Install the padlock in the lower hole of the locking pole (below-padlock not included).
Maintenance ⚠WARNING For proper performance, the following should be performed every 10,000 miles or 6 months, whichever comes first. Maintain the product by adopting a program of conscientious repair and maintenance in accordance with the following recommended procedures. It is recommended that the general condition of any tool be examined before it is used. Keep your tool in good repair. Keep all cutting tools sharp and clean.
Parts Diagram Parts List Reference 1 2 3 4 5 Part Number HH20TVR HM131HD HM64A NOT INCLUDED NOT INCLUDED Item Description 20 Ton Base Lunette Ring Hitch Bracket Locking Assembly 5/8'' – 11 NC x 5'' Lg.
Replacement Parts For replacement parts and technical questions, please call Customer Service at 1-800-222-5381. Not all product components are available for replacement. The illustrations provided are a convenient reference to the location and position of parts in the assembly sequence. When ordering parts, the following information will be required: item description, item model number, item serial number/item lot date code, and the replacement part reference number.
Limited Warranty Northern Tool and Equipment Company, Inc. ("We'' or ''Us'') warrants to the original purchaser only ("You'' or “Your”) that the Ultra-Tow XTP Series product purchased will be free from material defects in both materials and workmanship, normal wear and tear excepted, for a period of one year from date of purchase. The foregoing warranty is valid only if the installation and use of the product is strictly in accordance with product instructions.
Distributed by: Northern Tool & Equipment Company, Inc. Burnsville, Minnesota 55306 www.northerntool.
