Product Manual

Page 8 of 12
Locked Position
The illustration below shows the hitch in the locked position, with the safety clip installed. Insure the
lock assembly is in the unlock position before hooking up the hitch.
Un-Hitching
1. Unlock by removing safety pin
2. Flip secondary lock forward until it is pointing up.
3. Jack up the trailer hitch until it clears the hitch ball and the hitch will be back to the unlocked
position, as shown in the first illustration.
Maintenance
For proper performance, the following should be performed every 10,000 miles or 6 months,
whichever comes first.
1. Inspect for proper operation.
2. Inspect, in particular, the coupling area. Replace when the wear exceeds 1/8” from the original
surface profile.
3. Inspect for worn, damaged, and missing parts. Replace as required.
4. Check the torque specification of the ball after the first 200 miles of towing and every 400 miles
after that.