Product Manual

Page 7 of 14
Before Each Use
1. Inspect the unit for proper operation.
2. Inspect, in particular, the coupling area. Replace it when the wear exceeds 1/8'' (.125'') from the
original surface profile.
3. Inspect the unit for worn, damaged, and missing parts. Replace as required.
Operating Instructions
⚠WARNING
It is the user’s responsibility to be sure the receiver is capable of a 2,800 lbs. vertical load and
14,000 lbs. gross trailer weight.
Connecting to Hitch Ring
Hitching Up
Make sure all bystanders are in sight before backing the vehicle up to the hook-up.
1. Before operating, inspect the unit for proper operation, worn, damaged, or missing parts, and
secure the mounting. Correct as required before use.
2. Unlock by removing the safety pin.
3. Back the vehicle up until the pintle cup captures the hitch ring.
4. Lower the hitch ring into place.
5. Lock by inserting the safety pin.
6. Slide the safety chain onto the chain hooks after the safety chain is hooked to the vehicle.