Product Manual

Page 8 of 13
2. Unlock by removing the safety pin.
3. Back the vehicle up until the pintle cup captures the hitch ring.
4. Lower the hitch ring into place.
5. To lock, insert the safety pin.
6. Slide the safety chain onto the chain hooks after the safety chain is hooked to the vehicle.
Un-Hitching
1. Unlock by removing the safety pin.
2. Unhook the safety chain.
3. Flip the locking plate forward until it touches the hitch ball.
4. Jack up the trailer hitch until it clears the hitch ball and resets for the next hook-up.
Connecting to Ball Coupler
Make sure all bystanders are in sight before backing up the vehicle to hook-up.
Hitching Up
1. Before operating, inspect for proper operation, worn, damaged, or missing parts, and secure
mounting. Correct as required before use
2. Back the vehicle up until the hitch ball is located under ball hitch, then lower into place.
3. To lock, insert the safety pin in the ball coupler.
4. Slide the safety chain onto the chain hooks after the safety chain is hooked to vehicle.