Product Manual

Page 6 of 13
another tool. Never use an accessory that has a lower operating speed or operating pressure than
the tool itself.
Specific Operation Warnings
⚠WARNING
 To prevent serious injury or property damage, read and understand the owner’s manual.
 Do not exceed lowest rated load capacity in hitch system.
 Maintain an adequate vertical down (tongue) load to maintain control of the trailer (generally 10%)
without exceeding the specified rated capacities.
 Other steps and inspections are also required. Consult OSHA, D.O.T. regulations, and the
American Trucking Association for complete coupling and uncoupling procedures.
 Keep safety chains in place and in working order. Never operate the product without the safety
chains attached to vehicle.
Towing
⚠WARNING
Trailers and equipment designed for on-road towing within the stated capacities. For off-road
applications, reduce the capacities listed above by 25%, and use in conjunction with a swivel-type
drawbar.
Mounting
1. Use a secure mounting structure of sufficient strength to support the rated capacity of the hitch in
accordance with SAE J 849B.
2. The hitch receiver on the vehicle needs to have a 2" square tubing inside.
3. Insert the assembly into the receiver of the vehicle. Then, insert a 5/8" diameter bolt or pin
through the cross hole in receiver using a lock nut or locking pin to secure the bolt or hitch pin (not
included), as indicated below.