Auto-Locking Adjustable Slide Mount 12-Ton Capacity Owner’s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury.
® Thank you very much for choosing an Ultra-Tow XTP Series product! For future reference, please complete the owner’s record below: Serial Number/Lot Date Code: ________________________________ Purchase Date: ____________________________________________ Save the receipt, warranty, and this manual. It is important that you read the entire manual to become familiar with this product before you begin using it. This slide mount is designed for certain applications only.
Table of Contents Intended Use .......................................................................................................................................... 4 Technical Specifications ...................................................................................................................... 4 Important Safety Information ............................................................................................................... 4 Specific Operation Warnings .......................
Intended Use The Ultra-Tow XTP 12 Ton Auto-Locking Adjustable Slide Mount is designed to adapt to a 2” trailer hitch receiver tube to multi-height pintle hook applications. Its design allows for over-the-road towing within stated capacities. For off-road applications, reduce the capacities listed below by 25% and use in conjunction with a swivel type device.
Inspect the work area before each use. Keep work area clean, dry, free of clutter, and well lit. Cluttered, wet, or dark work areas can result in injury. Using the slide mount in confined work areas may put you dangerously close to cutting tools and rotating parts. Keep children and bystanders away from the work area while operating the slide mount. Do not allow children to handle the product.
Specific Operation Warnings ⚠WARNING To prevent serious injury or property damage, read and understand the owner’s manual. Do not exceed the lowest rated load capacity in hitch system. Maintain adequate vertical down (tongue) load to have control of the trailer (generally 10%), but do not exceed the specified rated capacities. Other steps and inspections are also required. Consult OSHA, D.O.T. regulations, and the American Trucking Association for complete coupling and uncoupling procedures.
Operating Instructions ⚠WARNING It is the user’s responsibility to be sure the receiver is capable of a 4,800 lbs. vertical load and a 24,000 lbs. gross trailer weight. Adjusting Side Mount Bracket 1. The clevis bracket, *combo hitch, or *pintle hook can be mounted directly onto the vehicle or mounted on our 12 ton adjustable slide mount and slide into a receiver. 2.
Parts Diagram Parts List Reference 1 2 3 4 Part Number ASMB12TA BSP12T HM108 HM53 Item Description Slide Adj.
Replacement Parts For replacement parts and technical questions, please call Customer Service at 1-800-222-5381. Not all product components are available for replacement. The illustrations provided are a convenient reference to the location and position of parts in the assembly sequence. When ordering parts, the following information will be required: item description, item model number, item serial number/item lot date code, and the replacement part reference number.
Limited Warranty Northern Tool and Equipment Company, Inc. ("We'' or '"Us'') warrants to the original purchaser only ("You'' or “Your”) that the Ultra-Tow XTP Series product purchased will be free from material defects in both materials and workmanship, normal wear and tear excepted, for a period of one year from date of purchase. The foregoing warranty is valid only if the installation and use of the product is strictly in accordance with product instructions.
Distributed by: Northern Tool & Equipment Company, Inc. Burnsville, Minnesota 55306 www.northerntool.