Product Manual

Page 4 of 14
Intended Use
This Ultra-Tow XTP Series Auto Locking A-Frame Trailer Coupler features an auto-locking system
with a steel lock assembly. The secondary lock has a safety clip designed to fit an off-the-shelf
padlock without an adaptor. This coupler can be used with any 2" ball having a capacity rating equal
to or higher than the coupler.
Technical Specifications
Property
Max. Gross Trailer Weight
Max. Vertical Load
Product Weight
Total Length
Material
Coupler Width
Mounting
Hitch Ball Diameter
Max. Gross Trailer Weight
Important Safety Information
WARNING
Read and understand all instructions. Failure to follow all instructions may result in serious injury
or property damage.
The warnings, cautions, and instructions in this manual cannot cover all possible conditions or
situations that could occur. Exercise common sense and caution when using this coupler. Always
be aware of the environment and ensure that the tool is used in a safe and responsible manner.
Do not allow persons to operate or assemble the coupler until they have read this manual and
have developed a thorough understanding of how it works.
Do not modify this coupler in any way. Unauthorized modification may impair the function and/or
safety and could affect the life of the product. There are specific applications for which the product
was designed.
Use the right tool for the job. DO NOT attempt to force small equipment to do the work of larger
industrial equipment. There are certain applications for which this equipment was designed. This
product will be safer and do a better job at the capacity for which it was intended. DO NOT use
this equipment for a purpose for which it was not intended.
Industrial or commercial applications must follow OSHA requirements.
WARNING
WORK AREA SAFETY
Inspect the work area before each use. Keep work area clean, dry, free of clutter, and well-lit.
Cluttered, wet, or dark work areas can result in injury. Using the product in confined work areas