Product Manual

Page 8 of 14
4. As you lower the coupler onto the ball, the Primary Lock and
Secondary Lock will end up in the locked position, as shown.
Green means LOCKED
To lock insert safety pin
Locked Position
The illustration shown to the right is in the locked position,
with the Safety Clip installed. Be sure the lock assembly is in the
unlock position before hook-up.
Un-Hitching
1. Unlock by removing the Safety Clip. Top Hole Secondary Lock
2. Flip the Secondary Lock forward until it is pointing up.
Hold this while raising the jack.
3. If both hands are needed, the Secondary Lock can be
held by inserting the Safety Clip in the Top Hole while
raising the jack.
4. Jack up the coupler until it clears the hitch ball and pull out the Safety Clip. The coupler is now
back to the unlock position, as shown in the first illustration.