Product Manual
Page 4 of 14
Intended Use
The Ultra-Tow XTP Series Auto Locking A-Frame Trailer Coupler features an auto-locking system
with a steel lock assembly. The secondary lock has a safety clip with a hole designed to fit an off-the-
shelf padlock without an adaptor. This coupler can be used with any 2 5/16" ball having a capacity
rating equal to or higher than the coupler.
Technical Specifications
Property
Specification
Maximum Gross Trailer Weight
7 Ton (14,000 lb.)
Maximum Vertical Load
0.7 Ton (1,400 lb.)
Product Weight
8.5 lb.
Total Length (inches)
13.12"
Material
Steel
Coupler Width (inches)
A-Frame
Mounting
Weld On
Hitch Ball Diameter (inches)
2 5/16"
Maximum Gross Trailer Weight (Hitch Ball)
Stamped on Hitch Ball
Important Safety Information
⚠WARNING
Read and understand all instructions. Failure to follow all instructions may result in serious injury
or property damage.
The warnings, cautions, and instructions in this manual cannot cover all possible conditions or
situations that could occur. Exercise common sense and caution when using this tool. Always be
aware of the environment and ensure that the tool is used in a safe and responsible manner.
Do not allow persons to operate or assemble the product until they have read this manual and
have developed a thorough understanding of how it works.
Do not modify this product in any way. Unauthorized modification may impair the function and/or
safety and could affect the life of the product. There are specific applications for which the product
was designed.
Use the right tool for the job. DO NOT attempt to force small equipment to do the work of larger
industrial equipment. There are certain applications for which this equipment was designed. This
product will be safer and do a better job at the capacity for which it was intended. DO NOT use
this equipment for a purpose for which it was not intended.
Industrial or commercial applications must follow OSHA requirements.
⚠WARNING
WORK AREA SAFETY
Inspect the work area before each use. Keep work area clean, dry, free of clutter, and well lit.
Cluttered, wet, or dark work areas can result in injury. Using the product in confined work areas
may put you dangerously close to other cutting tools and rotating parts.
Do not use the product where there is a risk of causing a fire or an explosion; e.g., in the presence
of flammable liquids, gases, or dust. The product can create sparks, which may ignite the
flammable liquids, gases, or dust.