Product Manual

Page 6 of 12
 To prevent serious injury or property damage, read and understand the owner’s manual.
 Do not exceed lowest rated load capacity in hitch system.
 Maintain an adequate vertical down (tongue) load to maintain control of the trailer (generally 10%)
without exceeding the specified rated capacities.
 Other steps and inspections are also required. Consult OSHA, D.O.T. regulations, and the
American Trucking Association for complete coupling and uncoupling procedures.
 Keep safety chains in place and in working order. Never operate the product without the safety
chains attached to vehicle.
Towing
⚠WARNING
Trailers and equipment are designed for on-road towing within the stated capacities. This coupler is
well-suited for use in the utility and construction industries.
Mounting
⚠WARNING
 Use a secure mounting structure of sufficient strength to support the rated capacity of the hitch in
accordance with SAE J 849B.
 The hole pattern is shown in the parts diagram.
 Use (3) 5/8” grade 8 fasteners, properly tightened (not included).
 The recommended minimum torque is 120 ft./lbs. (per SAE J429).
Before Each Use
 Inspect for proper operation.
 Inspect, in particular, the coupling area. Replace when the wear exceeds 1/8” from the original
surface profile.
 Inspect the product for worn, damaged, and missing parts. Replace parts as required.