Product Manual
Page 4 of 11
Intended Use
This Ultra-Tow XTP Series Adjustable Weld-On Mounting Channel features a 6-hole mount and is
designed for welding onto a trailer. The mounting channel can be used with a ball coupler or a tow
ring hitch.
Technical Specifications
Property
Specification
Max. Gross Trailer Weight
12.5 ton (25,000 lbs.)
Max. Vertical Load
2.5 ton (5,000 lbs.)
Product Weight
8.4 lbs.
Total Length
11.75 in.
Material
Steel
Mounting Channel Hole Mount Spacing
5/8” Diameter - 2” Apart
Mounting Channel Opening
3”
Important Safety Information
⚠WARNING
Read and understand all instructions. Failure to follow all instructions may result in serious injury
or property damage.
The warnings, cautions, and instructions in this manual cannot cover all possible conditions or
situations that could occur. Exercise common sense and caution when using this mounting
channel. Always be aware of the environment and ensure that the tool is used in a safe and
responsible manner.
Do not allow persons to operate or assemble the mounting channel until they have read this
manual and have developed a thorough understanding of how it works.
Do not modify this mounting channel in any way. Unauthorized modification may impair the
function and/or safety and could affect the life of the mounting channel. There are specific
applications for which the product was designed.
Use the right tool for the job. DO NOT attempt to force small equipment to do the work of larger
industrial equipment. There are certain applications for which this equipment was designed. It will
be a safer experience and do the job better at the capacity for which it was intended. DO NOT use
this equipment for a purpose for which it was not intended.
⚠CAUTION
MOUNTING CHANNEL USE AND CARE
Do not force the mounting channel. Products are safer and do a better job when used in the
manner for which they are designed. Plan your work, and use the correct product for the job.
Check for damaged parts before each use. Carefully check that the mounting channel will operate
properly and perform its intended function. Replace damaged or worn parts immediately. Never
operate the mounting channel with a damaged part.
Use only accessories that are recommended by the manufacturer for use with your mounting