User manual

OPERATION OVERVIEW
EDIT
SETUP MENU
 Setup assistant for adjusng all basic setups.  Manage your outputs and have access to every set- ngs and parameters.  Congure your inputs connected to your SmartMatriX Ultra.  Load your Logos and Frames into the system.  Congure Logos and Frames selecons.  Congure the Condence monitor. Monitoring: Congure the operator’s monitor including the re- soluon and choice of layout, to show input or output preview combinaons.  Access to all Analog Way maintenance services (update, etc.). Control: Access all control sengs.
Once your setup is complete, click on the EDIT tab to start building your presets. • Resize or reposion your layer by clicking and dragging the layer. • Load and place all your layers with your mouse and use the take
buon to send it to your program
• Drag sources into layers to change the source Other sengs are available for layers, please refer to the user manual.
 Choose your operaon mode using the setup menu (SETUP >   to drag and drop your unused output to the selected mode. 
Under SETUP > OUTPUT, click on the selected output on the le to have access to the setup. Then choose the format and rate. (Rate choice is only available for Monitoring/Preview output, the main outputs will use the rate dened under SETUP > )  Under this menu you have access to the  feature, Opcal SFP restart and test paern possibilies. TIP: Always try to use nave resoluon of your screens/ projectors to avoid addional scaling.
Click on SETUP > INPUT > GENERAL to have an overview of your inputs. Click on AUTOSET ALL to launch the automac detecon of all inputs once all sources are connected and turned on.  Click on the le on the individual input setup in order to dene your input As each input has mulple input plugs, you must choose one plug to display as this input. The remaining non-displayed plugs remain acve and can sll be congured. Click on your ACTIVE PLUG in order to choose the displayed input. Click on the SETUP PLUG to start setup of a plug not currently chosen as the acve plug. (Not necessarily displayed).
BUTTON COLOR USAGE
OUTPUT SETUP INPUT SETUP

#1 = Source is on the Program output #2 = Freeze enable #3 = Stand-by buon #4 = Preset Selecon


 
#1 = Source is on Preview #2 = Funcon available for modicaon
Contextual buon
Layer/source selected or is currently acve on the Program output
Layer/source selected or is not currently acve on the Program output
PRESET MANAGEMENT
Once you build a preset, you can save it as one of the 144 preset slots the SmartMatriX Ultra oers. • Click on SAVE MODE then choose your preset number.
• You can load your preset at any me on Program or Preview
by clicking on the preset number (with the  buon disabled), or simply drag and drop the preset into the Program or Preview windows.
• To reset a preset, please click on the preset number holding
 on your keyboard. Then into the windows below click on the reset buon