Technical data

ATTENTION!
The engine producer prescribes after every exchange of the filter to cut the old filter, it
should be taken out, unfolded and looked through, if it does not contain any metallic, steel,
bronze or aluminium splints, scraps of tamping, and etc. Occurrence of these parts in the
filter signalize usually increased wear out or damage of the engine.
Some of the tasks performed at the revision after 100 or 200 hours can be done only by a
authorized technician. We recommend to let these revision have done in authorized service of the
engine producer, or you can find them out through our company.
ATTENTION!
Condition for incidental successful reclamation of the engine faults is keeping prescribed
revision and work on the engine only the way the producer of the engine prescribed, or by
the authorized technician. We recommend you at least in the time of guarantee period to let
all work on engine have done by authorized technician, or to ensure the revision through
our company.
9.5.Service life of rubber parts of engine
All rubber parts of the engine should be changed after 5 years from the date of producing the
airplane.
This time restriction of the service life of the rubber parts of the engine is independent and
completing to its visual revisions, let these changes have done by authorized service of the
producer of the engine, or ensure them through our company.
48
Minimum speed 62 km/h
Travel speed 180-220 km/h
Maximum speed 275 km/h
Empty weight 295 kg
Area 12.2 m
2
Capacity 2 persons
Max taking off weight 450 kg
Engine ROTAX 912 S
Natural BA 95
Castrol GTX 3
Operating data and restriction
Registration sign OK-FUU 06
Empty weight 95 Kg
Max.taking off weight 450 Kg
Max. useful appliances 155Kg
Max. weight in luggage area 8 Kg
Min.weight of pilot 70 Kg
Max.allowed speed 275 Kg
Pádová rychlost VSO 62 Km/h
Max.speed when lifting the flaps 120 Km/h