Technical data

7.2.6.Electrical system voltage
Basic electrical installation on the plane is with the voltage of 12V and two wire conductors.
The electrical installation is equipped with no individual fuse. The switches used in the el.
system / main switch, all appliances, ignition circuits / function as fuses. Some of the electrical
appliances / for example the transmitter is ensured by its own appliance fuse /. If the voltage
decreases while switching on the appliances / for example while adjusting the airscrew , the
Flydat drops out / check the cleanness and tightening of the connection of battery and the level of
electrolyte. If the fault remains, contact the service center of the producer.
7.2.7. Tolerance and setting up values
Distance of electrodes of the sparks 0.7mm
Inflating the pneumatic tyres 1.2hPa
7.2.8. Supporting and subordinate construction
Wings, tale areas and the body are considered as the supporting constructions. Non-supporting
construction is the upper and the lower cover of the engine, covers of the undercarriage wheels
and the aerodynamic cover of the front undercarriage leg. There can not be any interference
made with these supporting constructions from the side of the user without the producer’s
approbation.
7.2.9. Special assembly, controlling and setting preparations
It is enough to use normal workshop tools and accessories for the maintenance of the airplane
made by the user.
7.2.10. Special tools
The barrel spanner for the sparks is part of the delivery. Other special tools are not perquisite for
normal maintenance made by the user.
7.2.11. Materials for small reparations
With regard to the type of the construction only small reparations can be made on the surface of
the airplane. For these reparations, use two component mastic. Clean and ungrease the damage
surface with technical petrol and cement it with the mastic prepared by the direction to use.
After dispersion hardening rub the mastic and varnish it.
7.2.12 Changing the fuel filter in the engine area
We can not say how often the fuel filter should be changed, because it depends on how well you
filter the fuel while filling the tanks.
That´s why use fuel filters with clear housing only, you can see the fouling of the filter. After the
first change of the filter / 12 hours the longest / change the filter after every 50 hours
preventively.
40