Installation manual

G:\InDATA\manuals\OM-KE E V1.02 August 17, 2012
Page 16
KING KE 1107
INSTALLATION INSTRUCTIONS cont.
CONNECTION TO A MASONRY CHIMNEY
Masonry chimney***
Ensure that a masonry chimney
meets the minimum standards
(NFPA) by having it inspected by
a professional. Make sure there are
no cracks, loose mortar or other
signs of deterioration and blockage.
Have the chimney cleaned before
the stove is installed and operated.
When connecting the stove through
a combustible wall to a masonry
chimney, special methods are needed.
In Canada,
e wall cut away is to provide 18”
clearance for the connector. e
resulting space must remain empty. A
ush mounted sheet metal cover may
be used on one side only. If covers are
to be used on both sides, each cover
must be mounted on noncombustible
spacers at least 1” clear of the wall.
***Blaze King recommends the use of a Stainless steel liner, preferably insulated, inside a
masonry chimney. is to maintain proper dra and overall better operation of the unit.
Your local dealer or local jurisdiction can provide details of approved methods of passing a
chimney connector through a combustible wall in your area. In USA, the National Fire Protection
Association has minimum standards to comply with. In Canada , this type of installation must
conform to CAN/CSA-B365, Installation Code for Solid Fuel Burning Appliances and Equipment