User manual

Digital Projection Titan Pro Series 3 USING THE PROJECTOR Operating Guide
65Rev F July 2014
Reduce Black Level Uplift Width (continued)
In the Reduce Black Level Uplift
Width menu, settings correspond
to coordinates within the unblended
regions. Only relevant coordinates
are enabled.
To remove the artifact on the left:
1. Open the Reduce Black Level
Uplift Width menu of the
projector on the left.
2. Adjust Upper Right X and
Lower Right X.
3. Select Apply Uplift. The
black level uplift region of this
projector will withdraw from the
pond of mirrors of the other
projector and the artifact will
disappear.
To remove the artifact on the right,
• Open the Reduce Black
Level Uplift Width menu
of the projector on the right
and adjust Upper Left X and
Lower Left X, then select
Apply Uplift.
Notes
Main Menu
Edge Blend
Reduce Black Level Uplift Width
To apply the settings in this menu,
use the Apply Uplift command at
the bottom of the page.
For additional information, see The
DMD™ in the Reference Guide.
For a detailed step-by-step
description of the edge blend
process, see Blending images
from multiple projectors further in
this section.