User manual
Digital Projection Titan Pro Series 3 USING THE MENUS Operating Guide
40Rev F July 2014
Sliders
To use a slider, press the LEFT and RIGHT arrow buttons to adjust it.
Commands
To use a command, press OK. In the example below, press OK to conrm, or press EXIT to cancel.
Notes
Some menu items may not be
available due to settings in other
menus. These will be grayed out on
the actual menu.
When a globe icon appears next
to a setting, the setting affects all
sources and all inputs; otherwise,
only the current input source will be
affected if you change the setting.