User manual

Digital Projection Titan Pro Series 3 SIGNAL INPUTS AND OUTPUTS Connection Guide

27Rev F July 2014

Using HDMI/DVI switchers with the projector

When using an HDMI/DVI source switcher with the projector, it is important to set the switcher so that it passes the projector EDID through to

the source devices. If this is not done, the projector may not be able to lock to the source or display the source correctly as its video output

timings may not be compatible with those of the projector. Sometimes this is called transparent, pass-through or clone mode. Please see your

switcher’s manual for information on how to set this mode.

Additionally, sources which use HDCP encryption may not display properly when connected to the projector via a switcher. Refer to the

switcher’s manual for more information.

Sources

Switcher

Projector

Notes

The EDIDs in the switcher should be the same as the one in the projector.

EDID

1 32