User manual
Digital Projection Titan Pro Series 3 POSITIONING THE SCREEN AND PROJECTOR Installation and Quick-Start Guide
15Rev F July 2014
Redirecting the air outlet duct
The duct can be set to blow upwards whether the projector is in desktop or ceiling mode:
1. Unscrew the four screws securing the rear cover, then remove the cover.
2. Working from the back of the cover panel, unscrew the two screws securing the duct
3. Turn the duct through 180°, ret the two screws, then ret the cover.
Notes
Always allow the lamp to cool for
ve minutes before:
- disconnecting the power
- moving the projector
Rear cover
screws x4
Duct screws x2