Install guide

Wiring Descriptions
Pin Function Description
13-WHITE Park Light(+) - 10amp positive output to activate park lights.
Programmable output (menu 2)
14-BLACK/ Parking Brake(-) - Input to detect (-) when parking brake switch is applied.
WHITE
AUXILIARY CONNECTOR (4pin white)*
Pin Function Description
1-WHITE/GREEN LED(-) - External LED Output.
2-BLACK Dome Light(-) - 250ma dome light supervision output.
3-WHITE/BLUE Siren(+) - Output to activate siren. (Menu 1&2)
4-RED Trunk Input(-) - Input to detect (-) when trunk is open.
TEMP SENSOR* or INSTANT START CONNECTOR (2pin white)
*LT series ONLY.
ANTENNA CONNECTOR (4pin Blue)
RF Antenna with Program Button and LEDs
LOCK/ UNLOCK CONNECTOR (4pin red)
Pin Function Description
1-GREEN Lock(-) - Programmable 250ma LOCK output. (Menu 1)
2-RED 12volts - 250ma 12volt output for relays.
3-BLUE Unlock(-) - Programmable 250ma UNLOCK output
4-PINK 2nd Unlock(-) - Output when is pressed twice within three seconds.
AUXILIARY SENSOR CONNECTOR (4pin white)
Pin Function Description
1-BLUE Pre-warn Input(-) - Negative Pre-Warn sensor input.
2-GREEN Full-warn Input(-) - Negative Full-Warn sensor input.
3-BLACK Ground Output(-) - Negative 250ma Output for optional sensor.
4-RED 12Volt Output(-) - 12V 250ma Output for optional sensor.
AUXILIARY CONNECTOR (3pin white)
Pin Function Description
1-GREEN Horn(-) - 250ma horn output. Programmable auxiliary #5 output.
2-PINK Auxiliary #6(-) - 250ma auxiliary #6 output.
3-BLUE Disconnect(+)- Positive disconnect. Programmable positive start input.
REMOTE VEHICLE STARTER INSTALL MANUAL
PAGE 9