450 SERIES ADVANCED VEHICLE SECURITY SYSTEM OWNER'S GUIDE

ManualsBrandsUltra Start ManualsAutomobile Alarm450 SERIES

450 SERIES

REV.2007.07.03

ADVANCED VEHICLE SECURITY SYSTEM

OWNER'S GUIDE

FCC ID NOTICE

This device complies with Part 15 of the FCC rules. Operation is subject to the following conditions:

1. This device may not cause harmful interference, and

2.This device must accept any interference received, including interference that may cause undesired operation.

CAUTION: Changes or modifications not expressly approved by the part responsible for compliance void the user’s authority to operate

this devise.

www.ultrastarters.com

Summary of content (12 pages)

PAGE 1
REV.2007.07.03 450 SERIES ADVANCED VEHICLE SECURITY SYSTEM TM OWNER'S GUIDE www.ultrastarters.com FCC ID NOTICE This device complies with Part 15 of the FCC rules. Operation is subject to the following conditions: 1. This device may not cause harmful interference, and 2.This device must accept any interference received, including interference that may cause undesired operation.
PAGE 2
450 SERIES OWNER'S MANUAL PAGE 2 SYSTEM PROGRAMMING TABLE OF CONTENTS- Menu 1 Product Warranty...........................................................Page 3 Remote Functions Quick View......................................Pages 4 Second Car Operation Page 4 Valet Mode & Page 5 Emergency System Override Page 5 Alarm Functions.............................................................
PAGE 3
PAGE 3 WARRANTY - Menu 1 SYSTEM PROGRAMMING 450 SERIES OWNER'S MANUAL Applicated Security Technologies, Inc.
PAGE 4
50 SERIES PAGE 4 OWNER'S MANUAL BUTTON LOCK UNLOCK SYSTEM PROGRAMMING - Menu 1 QUICK VIEW OPERATION CHART BUTTON PRESS CHIRP / FLASH SYSTEM FUNCTION 1 SEC 1 LOCK / ARM ALARM 3 SEC 1 ACTIVATE PANIC PRESS THEN RELEASE THEN PRESS & HOLD 1 ACTIVATE CONSTANT LOCK OUTPUT ** 1 SEC 2 UNLOCK / DISARM 1 SEC WHILE ALARM IS TRIGGERED NONE TURNS OFF SIREN BUT ALARM IS STILL ARMED 1 SEC 3 UNLOCK / DISARM ALARM EVENT IN MEMORY see alarm event memory chart PRESS & HOLD FOR 1 5 SEC 1 ACTIVATES A
PAGE 5
BUTTON BUTTON PRESS CHIRP / FLASH SYSTEM FUNCTION 1 SEC 1 LOCK / ARM ALARM 3 SEC 1 ACTIVATE PANIC PRESS THEN RELEASE THEN PRESS & HOLD 1 ACTIVATE CONSTANT LOCK OUTPUT ** 1 SEC 2 UNLOCK / DISARM 1 SEC WHILE ALARM IS TRIGGERED NONE TURNS OFF SIREN BUT ALARM IS STILL ARMED 1 SEC 3 UNLOCK / DISARM ALARM EVENT IN MEMORY see alarm event memory chart PRESS & HOLD FOR 1 - 5 SEC 1 ACTIVATES AUX OUTPUT ** PROGRAMMABLE OUTPUT - CHECK WITH INSTALLATION CENTER FOR DETAILS
PAGE 6
450 SERIES OWNER'S MANUAL PAGE 6 SYSTEM PROGRAMMING - Menu 1 TRANSMITTER FUNCTIONS PRESS & RELEASE ARM SYSTEM / LOCK DOORS 1 2 3 4 5 Press and release the Arm/ Lock button on the remote transmitter. The park lights will flash and the siren/ horn will chirp one time. The doors will lock and the Starter Disable will activate. (optional) The LED will start flashing within five seconds.
PAGE 7
PAGE 7 TRANSMITTER FUNCTIONS SYSTEM PROGRAMMING - Menu 1 450 SERIES OWNER'S MANUAL PRESS & RELEASE DISARM SYSTEM / UNLOCK DOORS 1 2 3 4 Press then release the Disarm / Unlock button on the remote. The park lights will flash and the Siren will chirp Two times.* The doors will unlock and the Starter Disable** will deactivate. The LEDs will stop flashing.
PAGE 8
450 SERIES PAGE 8 OWNER'S MANUAL SYSTEM PROGRAMMING - Menu 1 TRANSMITTER FUNCTIONS PRESS HOLD ACTIVATE PANIC MODE 1 2 3 4 5 Press and HOLD the Arm/ Lock button for three seconds. The doors will lock and the Starter Disable will activate. (optional) The park lights will begin to flash and the siren will activate. To turn off panic, press Lock or Unlock buttons on remote. If no button is pressed, Panic Alarm will sound up to 1 minute then turn off.
PAGE 9
PAGE 10
450 SERIES PAGE 10 OWNER'S MANUAL SYSTEM PROGRAMMING SHOCK SENSOR - Menu 1 SHOCK SENSOR ADJUSTMENTS 1 - ENTER SHOCK SENSOR ADJUSTMENT MODE + Press & HOLD Lock + Unlock buttons at the same time Continue to hold for 3-5 seconds Until Siren Chirps 3 times 3 CHIRPS (Note: System will Arm or Disarm via silent arming prior to entering adjustment mode) 2 - ADJUSTING SENSOR Each time the lock button is pressed and released the sensitivity will decrease by 1 level.
PAGE 11
450 SERIES PAGE 11 DIAGNOSTICS SYSTEM PROGRAMMING - Menu 1 OWNER'S MANUAL ALARM STATUS / DIAGNOSTICS If the alarm system is triggered, the system will retain in memory the cause of the trigger. When disarming the alarm, the siren/horn will chirp 3 times to indicate the alarm had been triggered. The system’s LED will also flash in pulses to indicate which input triggered the alarm. *LED status will be cleared when the ignition is turned ON.
PAGE 12
450 SERIES PAGE12 OWNER'S MANUAL technical support: support@ultrastarters.com additional product information: www.ultrastarters.com IMPORTANT NOTES LOCK, UNLOCK, DRIVER'S DOOR PRIORITY UNLOCK, TRUNK RELEASE AND THE AUXILIARY OUTPUTS ARE OPTIONAL OUTPUTS. ENABLING THESE FEATURES REQUIRES CUSTOM INSTALLATION & PROGRAMMING. THESE FEATURES MAY NOT BE COMPATIBLE WITH SOME VEHICLES. FOR SAFETY REASONS THE TRUNK RELEASE OUTPUT WILL NOT ACTIVATE WHEN THE IGNITION IS IN THE ON POSITION.