Technical information

562600-000, Issue1.0, March 2014
56 of 57
Appendix 2 Interlocks
1. When the oscillating rail axle is locked the symbol shown here will appear
on the display. If the interlock was configured during installation the forward
and rear travel functions will be disabled when this symbol is visible.
2. When the oscillating rail axle is locked, PMERail will
start to monitor the equivalent UNLOCKED duty. If ei-
ther the lift capacity or the backward stability level of
the UNLOCKED duty is unsafe, the YELLOW
‘padlocks’ will be shown on the display. If the interlock
was configured during installation, the axle lock control
will be disabled preventing the axle from being
unlocked. Wheeled example shown.
The display will automatically revert back the top menu screen after ten seconds if a but-
ton has not been pressed.