Technical information

562600-000, Issue1.0, March 2014
55 of 57
+
Appendix 1 Duty Numbering
The duty number is made up of three values: Road/rail cant - active sector - Axle lock
status i.e. 2BL will be rail (0-50mm cant), sector B, Axles Locked.
Road/Rail Cant Levels
1
Road
2
Rail between 0-50mm
cant
3
Rail between 50-150mm
cant
4
Rail between150-250mm
cant (Default)
Axle status forms the last part of the duty number. Locked axle are labelled L, floating
axle U. Tracked machines have no floating / locked road duties.
Active sector
Rail Road
Wheeled Tracked
Floating Locked Floating Locked
N/A
Active Sector
Axle Lock Status
+
B
The cant levels shown here are
the default values. These can
be adjusted as required during
calibration. Cant measurement
shown refers to the machine
turret.
Duty sectors originate from from 0° slew (over
floating axle) and can contain sectors from a-r.
Each duty block (i.e. Road, Rail 0-50mm cant
etc) can have different configurations of
sectors. Only the current sector is shown on
the display.
N/A