Technical information

562600-000, Issue1.0, March 2014
43 of 57
12 Test / Diagnostics
The system test function is available from the top menu screen. This feature
allows the system functions to be verified and basic trouble-shooting to be
performed. In this mode, the amber LED will flash to indicate the system is in
maintenance mode. The system will continue to monitor any active limits to
monitor machine safety status if in lift mode. Alarm conditions and warnings /
controls will be issued as normal.
The image shown is an example. The exact contents of the sensor list will depend on ma-
chine type and specification.
12.1 Relay Function Test
Select the unit required from the list
shown opposite.
Relay / LED test
System information
Blue lamp, Alarm
and display LED test
Display options
Code protected ac-
cess to supervisor
features
Exit to previous menu
Press to highlight
connection / oper-
ate function
Exit to previous
menu
Motion cut outputs control hydraulic
services. See notation on screen for
individual assignment. Amber LED On
denotes output is On
Amber / Blue lamp / Motion Cut
outputs See notation on screen
for individual assignment. Amber
LED On denotes output is On
USB port. Not
supported in
this screen
CAN S and CAN D Communication
Link to Display and sensors. Amber
LED denotes output is On
Function Inputs. See notation on screen
for individual assignment. Amber LED
On denotes input is active
Link / Ign. Red LED
denotes unit failure
Override keyswitch
input. Amber LED On
denotes input is On