Technical information

562600-000, Issue1.0, March 2014
34 of 57
8.2.3 Virtual Wall Limit Setting - Manually set a limit
A virtual wall can be set on either side of the machine to a de-
sired distance by using the directional arrows to manually move
the limit.
The limit displayed is measured from the centre of the machine.
Do not travel once a slew limit has been set.
Step One
Press the Setup a virtual wall button
Step two
Use the Left and Right arrows to manually move the Virtual wall to the desired position.
Step three
Ensure the virtual wall is set correctly before pressing the GREEN TICK to accept and
use the displayed value.
Continued on next page
Setup a virtual wall
Moves the Virtual Wall
to the Left
Moves the Virtual Wall
to the Right
Accept displayed value
Virtual wall limit
Exit without change