Technical information

562600-000, Issue1.0, March 2014
33 of 57
Step four
Use the UP and DOWN arrows to increase and decrease the highlighted number. Use
the LEFT and RIGHT arrows to move the highlighter to the left and to the right. Press the
GREEN TICK to accept the displayed value.
Step five
Ensure the virtual wall is set correctly before pressing the GREEN TICK to accept and
use the limit displayed.
Once slew limits are set, the internal alarm will sound and the RED
LED will light if the equipment exceeds the limit. Always check that
the slew limit activates at the set point. The limit cannot be deactivated if in
the alarm state. Observe the operational limitations given in section 4. Do
not travel once a slew limit has been set.
Accept displayed value
Increases highlighted digit
Decreases highlighted digit
Accept displayed value
Cancel without change
Moves highlighter to
right / Hold to delete digit
Moves highlighter to left /
Hold to delete digit
Virtual wall limit
Safe Directional indicators. The triangles
indicate if it is safe GREEN, or unsafe RED
to slew or move a particular articulation.
Virtual wall limit