Technical information

562600-000, Issue1.0, March 2014
32 of 57
8.2.2 Virtual Wall Limit Setting - Dial in a value
A virtual wall can be set on either side of the machine to a de-
sired distance by either dialling in a value.
The value displayed is measured from the centre of the machine.
Do not travel once a slew limit has been set.
Step One
Press the Set up a virtual wall button
Step two
Press the Keypad button
Step three
Select a side to set the virtual wall on
Continued on next page
Keypad button
Moves highlighter UP
Moves highlighter DOWN
Accept highlighted
side
Exit without change
Virtual wall limit
Exit without change
Set up a virtual wall