Technical information

562600-000, Issue1.0, March 2014
31 of 57
8.2 Slew Limit
8.2.1 Slew Limits Menu
A virtual wall slew limit can be set entering a known
distance on the keypad or by moving the virtual wall
on the screen using the arrow buttons to the de-
sired limit. With a slew limit set, the screen will dis-
play a hatched area on the plan view.
A limit can be switched ON and OFF (a Confirm Opera-
tion screen will be displayed, see sections 8.2.3 to enter
a known value and section 8.2.4 for setting the limit by
manually moving the limit via the display.
Use with an offset boom: if a slew limit is active and the offset boom is moved from
straight ahead, the confirmation message shown here will appear. Press the red button to
confirm that you are aware that the slew limit will be cancelled. This action is recorded in
the event data log.
See section 8.2.2/3 for virtual wall setup and section 8.2.4.1 PMERail Ultra Virtual Wall
Limitation
Switches height monitoring
ON and OFF
Set virtual wall
Exit to previous menu
Virtual wall limit