Technical information

562600-000, Issue1.0, March 2014
28 of 57
8.1.2 Height Limit Setting - Known Height
A known limit can be entered into the
display:
Step One
Press the ’Enter a value’ button
Step Two
Set a limit and press Green TICK to accept.
Enter a value
Exit to previous menu
Increases highlighted digit
Decreases highlighted digit
Accept displayed value
Cancel without change
Moves highlighter to
right / Hold to delete digit
Moves highlighter to left /
Hold to delete digit
Once a height limit set, the internal alarm will sound and the RED
LED will light if the equipment exceeds the current limit. Always
check that the current limit activates at the set point. The restriction cannot
be deactivated if in the alarm state. Observe the operational limitations
given in section 4.
Height limit shown here