Technical information

562600-000, Issue1.0, March 2014
25 of 57
In Gauge warning message
The GREEN TICK symbol indicates that the right and left corners of the
counterweight, bucket pin and the highest point of the machine are within the
W6a gauge dimensions. The In gauge button will now appear in the top
menu, press to lock slew left / right, boom up and down, artic up and down
and arm in and out. Press again to unlock these services
The RED CROSS symbol indicates that the machine is outside of the gauge
dimensions.
7.11 In Gauge Indicator
If the machine is on-rail, within the Wa6 gauge and the oscillating axle is
unlocked, the In Gauge icon will turn from a RED CROSS to a GREEN TICK
and the In Gauge button will appear in the top menu, press to motion to cut all
services for safe travel.
WARNING The system is unaware of any addi-
tional implements / tools, see section 8.4.
Machines with front and rear oscillating axles will
indicate In Gauge when either the front or rear ax-
les are unlocked or when both are unlocked. In
gauge indication will not be available if both (front
and rear) axles are locked.
Wa6 Gauge dimensions are shown opposite.
Safe Directional indicators will be all RED when In Gauge
mode is active indicating motions are cut
Press to Lock or
unlock machine into
IN GAUGE mode.