Technical information

562600-000, Issue1.0, March 2014
23 of 57
7.9 Load Chart Menu
PME can display the load chart for the currently selected lifting
duty and lifting point. *If the machine is equipped with a hydrau-
lically adjustable boom, both maximum and minimum charts will
be available via this button. Hydraulically adjustable booms al-
low the machine to reach the same point in space (i.e. height
and radius combination) with a variety of different equipment angles. The minimum loads
shown refer to the least favourable angle combination. When load charts are being dis-
played, machine safety status is still monitored.
If a particular lift is limited by hydraulic capacity rather than stability, the SWL value will be
in a coloured box - RED for boom, GREEN for articulated boom and BLUE for ARM. A
lifting point can be restricted to a maximum value, if this is the case the SWL value will be
in a YELLOW box.
The display will automatically revert back the top menu screen after ten seconds if a but-
ton has not been pressed.
Lifting point Radius
SWL values
Hydraulically limited SWL
*Switches between
maximum and minimum
load charts
Switches information bar
ON and OFF
Exit to previous menu
Lifting point Height
Duty name and Lifting
point name