Technical information

562600-000, Issue1.0, March 2014
20 of 57
7.7.3 Tandem Lifting Mode
PMERAIL can be configured for tandem lifting. If
tandem lifting has been calibrated, it will be manu-
ally selected via the lift Mode menu. Once selected,
the blue lamp will flash to indicate the system is in
tandem lifting mode. The Supervisor keyswitch
must be positioned in the SET position to select or cancel this feature, see section 5.5 for
further details.
Moves highlighter UP
Moves highlighter DOWN
Accept highlighted
lifting point
Exit without change
Tandem Lifting symbol shown
only in Tandem Lifting mode