Technical information

562600-000, Issue1.0, March 2014
15 of 57
7.2 Operation within the Safe Working Load
With Lifting Mode active, the Load on Hook, current lifting point, current duty, lifting point
radius and the maximum safe working load for that radius are shown.
7.3 Barred Duties, warnings and Interlocks
A duty can be denied entry by locking certain machine hydraulic services if there is insuf-
ficient lifting capacity in that duty. For Lift and carry duties only, no motion cut will occur.
Travel and axle lock interlocks can operate automatically to ensure the stability of the ma-
chine during use, see Appendix 2.
7.4 Approach to Overload
With Lifting Mode active, if the load is greater than 95% of the maximum safe working
load, the system will warn the machine is approaching the lifting capacity at the current
height and radius.
In the event of an approach to overload or an overload condition, the lifting
point should only be moved in a direction that increases the safe working
load. See section 4 for further information.
If the load is greater than 95% of the
maximum safe working load.
 The load capacity indicator will be
amber
 The amber LED will be lit
 The internal alarm will sound
 The message shown here will be
displayed.
If the load is less than 95% of the
maximum safe working load
 The load capacity indicator will be
green
 The green LED will be lit