Technical information

This guide describes operation of the
PROLEC PME LIFTING AND MACHINE ENVELOPE SAFETY SYSTEM FOR
RAIL CONSTRUCTION PLANT
Model covered : PART No. MODEL Ref
PMERail PMERail - RCC / MEC SYSTEM
PMERail Lite PMERail Lite - RCC / MEC SYSTEM
PMERail Max PMERail Max - RCC / MEC SYSTEM
PMERail Ultra PMERail Ultra - RCC / MEC SYSTEM
PMRail Ultra RCC system has been designed for compliance with RIS-1530-PLT Is-
sue 4 and NR MLD/004
IMPORTANT : Before use, check the Engineering Acceptance certification and ma-
chine documentation to confirm if the Rated Capacity Controller, Adjacent Line
Open and Overhead Line Equipment limitations that may exist within the use of the
machine and / or the PME system.
Prolec supports a nationwide dealer network. Warranty claims, service work, technical
information and spare parts are available by contacting :
Prolec Ltd Telephone [phone]
25 Benson Road Fax [phone]
Nuffield Industrial Estate E-mail [e-mail]
Poole Dorset BH17 0GB
DURING NORMAL OPERATION THE SAFE WORKING LOAD OF A CRANE SHOULD
NOT BE EXCEEDED. THEREFORE THE WARNING OF OVERLOAD SHOULD NOT
BE USED AS A NORMAL OPERATING FACILITY. IT SHOULD BE NOTED THAT
CERTAIN STATUTORY REQUIREMENTS DO NOT PERMIT THE SAFE WORKING
LOAD TO BE EXCEEDED EXCEPT FOR THE PURPOSE OF TESTING.
THIS RATED CAPACITY CONTROLLER (RCC) IS NOT SUITABLE FOR USE IN
EXPLOSIVE ATMOSPHERES. ADJUSTMENT BY UNAUTHORISED PERSONS WILL
INVALIDATE ANY WARRANTY OR CERTIFICATION SUPPLIED. IF A PROBLEM
ARISES WHICH CANNOT BE RECTIFIED USING THIS GUIDE, AUTHORISED
SERVICE SHOULD BE SOUGHT.
THIS DEVICE IS CERTIFIED TO MEET CURRENT UK & EC SAFETY REGULATIONS
FOR LIFTING OPERATIONS.
Any alterations or modifications to machine components which affect this system and any
system component failure must be reported to Prolec Ltd or via the machine convertor/
service agreement holder. This manual must be kept with the product and be passed on
to any subsequent user of the product.
Whilst every effort has been made to ensure the accuracy of the information supplied in
this manual, Prolec Ltd cannot be held responsible for any errors or omissions.
Manufacturers original instructions.