Technical information

562620-000, Issue1.0, March 2014
12 of 25
7 OLE equipped system - PMERail Ultra
Any system with Height limiting enabled will allow a height limit to be set
which will stop the boom, artic (if fitted) and arm at the limit whichever is
the highest. See section 16 for monitored points on the machine. PMERail
is NOT aware of any attachment fitted, therefore where an attachment is
in use, limits should be determined and set in accordance with the safe
system of work.
Care should be taken to test that the limit is set correctly. Observe the operational limita-
tions given in section 3.