Instruction manual

Operation
Print utilities (option)
2-82 WX Ultra Series Thermo Scientific
Figure 2-31 PRINT UTILITIES Screen
Operating procedure
Note
• Select “1. Printer” of “4. Select Option Unit” in the User Customization Routines screen. Refer
to Section User Customizations.
No. Item Operating procedure
1 Machine Log
(1) Select the corresponding item number on the Print Utilities Menu screen.
2 Rotor Management
3 Rotor Log (1) On the Print Utilities Menu screen, select “3. Rotor Log”.
(2) On the Rotor Management screen, move the cursor to select a rotor and press the ENTER
key.
(3) Select “1: Yes” as print permission.
4 Set run parameters (1) Select the corresponding item number on the Print Utilities menu screen.
5 Run result
6 Set run parameters and result
• The display switches to the Rotor
Management screen.