Instruction manual

Operation
Rotor management
2-62 WX Ultra Series Thermo Scientific
Step Key operation Screen display and considerations
1 While in the Run Screen, use the cur-
sor keys to move the cursor to RLM
and press ENTER key.
Switch each page of the Rotor List by
using the left and right arrow keys
().
2
Use the cursor keys ( and ) to
move the cursor to the line that is not
yet registered (New Rotor), and press
the ENTER key.
3 Select “Creating or Changing”.
4 Select “Fixed Angle Rotor” in the Rotor
List screen.
and
• The display switches to the
Rotor Management screen
and the Rotor List is
displayed.
• The display switches to the
Rotor List screen.
• The display switches to the
Fixed Angle Rotor List
screen