Instruction manual

Operation
How to use the FUNCTION field
2-46 WX Ultra Series Thermo Scientific
Canceling the RTC settings
The canceling procedure varies depending on whether the RTC run is started (START is pressed) or
not.
3 Making a change to date and time set-
tings
(1) Select “Setting stop time” or “Set-
ting start time”.
To change the “Setting stop time”,
press
(2) Perform process 4 and later ones in
1. How to perform an RTC run men-
tioned above and change the date and
time settings.
See Section 1. How to perform an RTC run.
• The screen switches to a
screen where you can enter a
stop time (or start time).
Step Key operation Screen display and considerations
1 (1) While in the Run Screen, use cursor
keys to move the cursor to PROG • RTC
and then press ENTER key.
(2) Use cursor keys to move the cursor
to RTC and then press ENTER key.
>> The message indicator displays RTC.
• The FUNCTION field
switches to the RTC field.