Instruction manual

Operation
How to use the FUNCTION field
2-42 WX Ultra Series Thermo Scientific
1. How to perform an RTC run
Step Key operation Screen display and considerations
1 Set operational conditions while in the
Run Screen.
Use cursor keys to enter the SPEED
part into an input wait, then press
Move the cursor to PROG • RTC and
press ENTER key.
2 Move the cursor to RTC and press
ENTER key.
3 Select the item you wish to set. To
select the “Setting stop time”, press
>> Setting the “Setting stop time”
>> Setting the “Setting start time”
• The display switches to the
RTC Setup screen.
• The “dd” item blinks.
“mm” and “dd” indicate the
current date as a default.
• If you do not make any
input for 30 seconds, the
cursor disappears, and you
cannot make an input. At
that time, press a cursor key.