Instruction manual

Operation
How to use the FUNCTION field
Thermo Scientific WX Ultra Series 2-37
11 Add Remark to the run conditions in
the memory.
(1) Press the ESC key.
(2) To add Remark to the run conditions
in the memory, select “Yes”.
(3) Select “Inputting Remark”.
(4) Enter Remark in 8 characters or
less.
(5) After entering the characters of
Remark, move the cursor to SET and
press the ENTER key to register the
character string.
(6) Check the contents of Remark and
select “Yes”.
>> When you press ESC key, the bottom row message is displayed.
(1) A selection field to input or delete Remark appears.
(2) A selection field to select either inputting or deleting appears.
(3) The display switches to the Remark registration field.
(4) Remark is entered from the left.
(5) The display switches to the Remark check field.
(6) The display switches to the registration completion message field.
12 Press ESC key when the storing is over.
13 Select “Running”.
• The message field in the bottom
row switches to what is shown in
the diagram on your lefthand
side, and the storing of the run
conditions in the appropriate
memory number is completed.