Instruction manual

Operation

How to use the FUNCTION field

Thermo Scientific WX Ultra Series 2-35

4 Select “Creating or Changing.”

Enter a desired condition.

To select SPEED, press

To select no rotor, press.

>> To select and enter RCF

max

or RCF

avg

, see Section 1. Programming procedure for

run conditions (creating or changing)

6 Specify run conditions for step 1.

>> If you press the cursor key (downward) after setting numeric value for

DECEL (D) in step 1, setting the run conditions in step 1 finishes and step 2 enters

into an input wait state.

7 Then specify run conditions for step 2.

• The message field in the bottom

row switches to what you see on

your left-hand side.

• The display switches to the

Choose Rotor screen.

• The display switches to the

SPEED priority setting field and

the SPEED area blinks.

Downward cursor key

• The entry of run conditions for

step 1 is complete.

Downward cursor key

• The entry of run conditions for

step 2 is complete.