Instruction manual

Operation
How to use the FUNCTION field
Thermo Scientific WX Ultra Series 2-31
(b) If you do not know which memory number you need
Step Key operation Screen display and considerations
1 Turn on the POWER switch of this
machine.
>> The panel display appears.
>> The door unlocks.
2 Install a rotor. >> Install the rotor securely on the shaft.
3 While in the Run Screen, use cursor
keys to move the cursor to PROG • RTC
and then press ENTER key. Then, move
the cursor to PROG and press ENTER
key.
4
Press the upward cursor key to
blink PROGRAM. Then press ENTER
key.
5 Use numeric keys to enter the memory
number where you have stored data.
To call memory number 3, press
>>If the contents of the memory number you have just recalled is not what you
want, press ESC to switch back to the Program Map screen and then call another
memory unit number.
6 If you get the memory number you
want, select Running.
• The FUNCTION field switches
to the PROGRAM field.
• The MEMORY No. setting field
blinks.
• The display switches to the
Program Map screen and the
MEMORY No. selection field
blinks.
• The image of the specified
memory number appears.
• The message field in the bottom
row switches to what you see
below.