Instruction manual

Operation
How to use the FUNCTION field
2-28 WX Ultra Series Thermo Scientific
10 Add Remark to the run conditions in
the memory.
(1) Press the ESC key.
(2) To add Remark to the run conditions
in the memory, select “Yes”.
(3) Select “Inputting Remark”.
(4) Enter Remark in 8 characters or
less.
(5) After entering the characters for
Remark, move the cursor to SET and
press the ENTER key to register the
character string.
(6) Check the contents of Remark and
select “Yes”.
>> When you press ESC key, the bottom row message is displayed.
(1) A selection field to input or delete Remark appears.
(2) A selection field to select either inputting or deleting appears.
(3) The display switches to the Remark registration field.
(4) Remark is entered from the left.
(5) The display switches to the Remark check field.
(6) The display switches to the registration completion message field.