Instruction manual

Operation
How to use the FUNCTION field
Thermo Scientific WX Ultra Series 2-27
To change a run condition, use cursor
keys to move to the item you want to
change and then enter a value.
8
Press the downward cursor key
to blink the value part of the message
field in the bottom row. Then select
“Yes”.
Yes
No
>> If you select “Yes”:
>> If you select “No”, the message field in the bottom row switches to what you
see in process 4. Select a new setting.
9 After entering memory run conditions,
perform an entry operations for User
Name.
(1) Press the ESC key.
(2) When attaching User Name to the
memory run conditions, select “Yes”.
>> When you press ESC key, the bottom row message is displayed.
(1) A selection field as to whether User Name should be input or deleted appears.
(2) A selection field for selecting either inputting or deleting appears.
(3) Select “Inputting User Name”.
(4) Enter 4 digits of the ID CODE that is
already registered.
(5) Check User name and select “Yes”.
(3) The display switches to the ID CODE input field.
(4) The display switches to the User Name check field.
(5) The display switches to the Registration completion message field.
• This diagram shows what you will
get if you move the cursor and
enter the TIME field into an
input wait.
• The message field in the bottom
row switches to what is shown in
the diagram to the left, and the
storing of the run conditions in
memory number 3 is completed.
ID code